EMS Analogue Addressable Detector

This detector range has similar specification and looks as the addressable device except it has an advanced detection head to enable analogue response to be taken and recorded by the system. With the aid of the laptop PC interrogation software these levels can be recorded to determine head sensitivity and service requirements. In all other respects the performance is identical as these levels are otherwise fixed at determined points using the DIP switches to adjust from low, medium and high sensitivity levels. The sensitivity levels are standard on both types of detectors and is common throughout the Ziton EMS range.

NEW! By ticking the upgrade box the device then includes for an in-built electronic fire alarm sounder therefore separate sounders are no longer required whenever these combined detectors are used. Most importantly this saves over £150 over the separate devices.

It should be noted that the diameter  of the device increases to 250 mm on the combined sounder device.