Wireless Alarms -TTS Fire & Security Ltd
http://www.ttsfire.co.uk
Online Catalog : Wireless Home & Small Commercial Security Alarms : Visonic Powermax Security System - Special Offer
X10 Control DevicesX10 Control Devices X10 is a communications protocol for remote control of electrical devices. It is designed for communications between X10 transmitters and X10 receivers which communicate by inducing a coded data signal into the mains standard household wiring. The Visonic Powermax system will control up to 7 of these devices as alarm events and or timed events or by manual remote control via the powermax in-built modem.


VISONIC POWERMAX CONTROL- PANEL 433MHz
NORMAL RETAIL PRICE £301.25

Further down this page are our PIR's, Door/Window contacts plus many other items which you can add to make up a complete wireless home security system.

This price is for the control panel only. The contents for this item include batteries and mains power supply unit.


Price:  £210.00 (€231,00) (Excluding: UK & E.U. VAT at 20%)

VISONIC POWERMAX CONTROL- PANEL 433MHz


VISONIC NEXT MCW DIGITAL PIR DETECTOR 433MHz VISONIC NEXT MCW DIGITAL PIR DETECTOR 433MHz
The NEXT PIR MCW is the latest product in Visonic's wireless range. It is at the forefront of modern digital technology, a microprocessor-controlled wireless digital PIR detector, designed for very easy installation, free of vertical adjustment with wall creep zone protection! 
More information

Price:  £43.00 (€47,30) (Excluding: UK & E.U. VAT at 20%)


VISONIC NEXT K985 MCW DIGITAL PET FRIENDLY PIR DETECTOR 433MHz
The NEXT K985 PET FRIENDLY PIR MCW is the latest product in Visonic's wireless range. Pet tolerant upto 85LB. It is at the forefront of modern digital technology, a microprocessor-controlled wireless digital PIR detector, designed for very easy installation, free of vertical adjustment with wall creep zone protection! 
More information

Price:  £41.00 (€45,10) (Excluding: UK & E.U. VAT at 20%)
VISONIC NEXT K985 MCW DIGITAL PET FRIENDLY PIR DETECTOR 433MHz


VISONIC POWERCODE MAGNETIC CONTACT TX MCT302 433MHz VISONIC POWERCODE MAGNETIC CONTACT TX MCT302 433MHz
NORMAL RETAIL PRICE £52.61

Magnetic contact door or window transmitter with seperate hard-wired input for monitoring reed switches.


More information

Price:  £39.50 (€43,45) (Excluding: UK & E.U. VAT at 20%)


VISONIC CODE-SECURE MCT234 433MHz REMOTE FOB
This remote keyfob is for the old 433MHz Powermax and Powermax plus systems.
More information

Price:  £29.49 (€32,44) (Excluding: UK & E.U. VAT at 20%)
VISONIC CODE-SECURE MCT234 433MHz REMOTE FOB


VISONIC POWERMAX MCT- 425 SMOKE DETECTOR 433MHz VISONIC POWERMAX MCT- 425 SMOKE DETECTOR 433MHz
NORMAL RETAIL PRICE £112.53. New Design meeting EN approvals

Old design reference was mct423
More information

Price:  £72.00 (€79,20) (Excluding: UK & E.U. VAT at 20%)


VISONIC POWERCODE FLOOD DETECTOR MCT - 550 433MHz
MCT-550 is a fully supervised wireless flood detector compatible with PowerMax and other Visonic PowerCode wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
More Information

Price:  £49.00 (€53,90) (Excluding: UK & E.U. VAT at 20%)
VISONIC POWERCODE FLOOD DETECTOR MCT - 550 433MHz


Reed Switch and Magnet Reed Switch and Magnet
This reed switch can be wired directly into the 2nd channel of the MCT302 door/window transmitter or the MCT100 - 2 input transmiiter. More than 1 can be used in parallel to cover multiple openings. eg. A garage door and two windows can be covered using only 1 transmitter and 2 reed switches. No cable supplied.


Price:  £1.60 (€1,76) (Excluding: UK & E.U. VAT at 20%)


Visonic Powermax Software and Data Cable (4pin)
NORMAL RETAIL PRICE £72.53.

Comprehensive software available on CD Rom. Suitable for windows 95, 98, Windows NT, Windows 2000 and Windows XP . This powerful utility software allows uploading and downloading of setup information and radio signal levels from the Powermax control panel. Supplied with an RS232 lead and TTL level shifter for connection to suitable PC. Information can be accessed directly via the interface lead or remotely via modem control.

IMPORTANT NOTES:-

1. This software is for the Powermax panel with 4 pin header. (See figure 28, page 8 in the Installation Instructions). The 12 pin header software is shown on the Powermax+ page

2. We are unable to offer software support as it assumes a PC literate user will be operating this software.
More information (pdf)

Price:  £58.00 (€63,80) (Excluding: UK & E.U. VAT at 20%)

Visonic Powermax Software and Data Cable (4pin)


Visonic MCX-600 Wireless repeater for PowerCode system 433MHz Visonic MCX-600 Wireless repeater for PowerCode system 433MHz
NORMAL RETAIL PRICE £139.47

A range extender for larger than normal premises. Most domestic properties typically 4 bed detached houses should have sufficient reception range with just a panel. This item requires a 13.8v power supply to function. Also a rechargable 9v PP3 battery if mains failure back-up is required.
More information

Price:  £76.00 (€83,60) (Excluding: UK & E.U. VAT at 20%)


Elmdene 12v High Capacity Battery Backed Supply
A 12 volt mains battery backed power supply unit (13.8volt o/p). Compulsory for use with Powermax system when using starlight 2000 external sounder and strobe (12dc power supply only works with Mark 1 Powermax). This item has already been included in your order when selecting the external starlight 2000 sounder unless you deselected the option from the sounder purchase option above. The PSU item here is available separately for those wishing to upgrade their systems or as a replacement item.

Important note:- Do not use both power supplies for alarm system.


More information

Price:  £44.70 (€49,17) (Excluding: UK & E.U. VAT at 20%)

Elmdene 12v High Capacity Battery Backed Supply
includes 2.1 Amp hour Yuasa / Yucel battery


POWERMAX SOUNDER MODULE AT202 POWERMAX SOUNDER MODULE AT202
A Module to allow Powermax to be connected to a standard external sounder. This module requires a separate 1 amp, 12 volt power supply to work and therefore has been automatically selected in the options below. This will be added to your order during checkout. However, there may be requirements to purchase the Module without the power supply, in which case the options can be deselected. Note:- If this item is ordered at the same time as a Powermax panel, then the panel power supply transformer is removed (Unless requested to leave in) . This is done as a precaution to stop both power supplies being connected which damages the transformer and renders it useless.


More information

Price:  £12.00 (€13,20) (Excluding: UK & E.U. VAT at 20%)

Elmdene 12v High Capacity Battery Backed Supply

12v 2.1Amp/Hour Back-up Battery


9 Volt ac Power Supply

Replacement or Spare Power Supply for the powermax or powermax plus (+) panel 230 VAC, 50Hz / 9VAC

All panels will work with this 9VAC power supply. But if you are using a 12v external sounder or an AT202 sounder module then you will require a 12VDC power supply.

Power Supply: Specifications 230 VAC, 50 Hz / 9 VAC, 1.00 A c/w 2m mains cable + 3.5m low voltage cable




Price:  £12.00 (€13,20) (Excluding: UK & E.U. VAT at 20%)

9 Volt ac Power Supply


X10 Control DevicesX10 Control Devices X10 is a communications protocol for remote control of electrical devices. It is designed for communications between X10 transmitters and X10 receivers which communicate by inducing a coded data signal into the mains standard household wiring. The Visonic Powermax system will control up to 7 of these devices as alarm events and or timed events or by manual remote control via the powermax in-built modem.
Online Catalog : Wireless Home & Small Commercial Security Alarms : Visonic Powermax Security System - Special Offer

TTS Fire & Security Ltd - Buy online with confidence.